Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img DS1804-100+ datasheet by Maxim Integrated Products

    • Data Acquisition - Digital Potentiometers, Integrated Circuits (ICs), IC POT TRIMMER NV 100K 8-DIP
    • Original
    • Yes
    • Yes
    • Transferred
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    DS1804-100+ datasheet preview

    DS1804-100+ Frequently Asked Questions (FAQs)

    • The recommended operating voltage range for the DS1804-100+ is 2.7V to 5.5V.
    • To properly power down the DS1804-100+, ensure that the SHDN pin is pulled high and the VCC pin is connected to a voltage source. This will put the device in shutdown mode, minimizing power consumption.
    • The maximum current rating for the DS1804-100+ is 10mA per channel.
    • To configure the DS1804-100+ for 4-wire SPI operation, connect the SCK, MOSI, MISO, and SS pins accordingly. For 3-wire SPI operation, connect the SCK, MOSI, and MISO pins, and tie the SS pin high.
    • The WP (Write Protect) pin is used to prevent accidental changes to the device's configuration. When the WP pin is pulled high, the device is in write-protect mode, and any attempts to write to the device will be ignored.
    Supplyframe Tracking Pixel