DS1867-10+ datasheet by Maxim Integrated Products

DS1867-10+ Frequently Asked Questions (FAQs)

• What is the recommended operating temperature range for the DS1867-10+?
  The recommended operating temperature range for the DS1867-10+ is -40°C to +125°C.
• How do I ensure reliable communication between the DS1867-10+ and the microcontroller?
  To ensure reliable communication, make sure to follow the recommended layout and routing guidelines for the I2C bus, use a pull-up resistor on the SCL line, and implement error checking and retry mechanisms in the microcontroller's firmware.
• Can I use the DS1867-10+ with a 5V power supply?
  No, the DS1867-10+ is designed to operate with a 3.3V power supply. Using a 5V power supply may damage the device or affect its performance.
• How do I configure the DS1867-10+ for use with a specific voltage range?
  The DS1867-10+ has a programmable voltage range. You can configure it by writing to the appropriate registers using the I2C interface. Refer to the datasheet for the specific register addresses and values required for your desired voltage range.
• What is the typical current consumption of the DS1867-10+?
  The typical current consumption of the DS1867-10+ is around 1mA, but this can vary depending on the operating mode and the voltage range being monitored.