The maximum cable length supported by the DS2480B is 100 meters, but it can be extended up to 200 meters with the use of repeaters.
The DS2480B can be configured for 1-Wire communication by setting the appropriate registers and using the 1-Wire protocol commands. Refer to the datasheet and application notes for detailed instructions.
The power consumption of the DS2480B is typically around 10mA, but it can vary depending on the operating frequency and mode of operation.
Yes, the DS2480B can be used for 1-Wire slave devices, but it requires an external 1-Wire slave device controller or a microcontroller to handle the 1-Wire protocol.
To troubleshoot issues with the DS2480B, check the power supply, clock frequency, and signal integrity. Use a logic analyzer or oscilloscope to verify the signal waveforms and timing. Refer to the datasheet and application notes for troubleshooting guidelines.
DS2480B datasheet
by Maxim Integrated Products
