Maxim provides a recommended PCB layout in the datasheet, but it's essential to follow good layout practices, such as keeping the analog and digital grounds separate, using a solid ground plane, and minimizing noise coupling. Additionally, ensure the layout is symmetrical to reduce EMI and noise.
The DS26324GN+ requires a single 3.3V or 5V power supply. Ensure the power supply is clean and regulated, and decouple the power pins with 0.1uF and 10uF capacitors. Also, make sure the power-up sequence is correct, and the device is powered up before the clock signal is applied.
The DS26324GN+ supports clock frequencies up to 100MHz. However, the maximum frequency may vary depending on the specific application and system requirements. It's essential to consult the datasheet and perform thorough testing to ensure the device operates within the specified frequency range.
The DS26324GN+ can be configured for differential or single-ended operation by setting the appropriate pins. For differential operation, connect the differential clock inputs (CLKIN+ and CLKIN-) to the clock source, and for single-ended operation, connect the single-ended clock input (CLKIN) to the clock source. Consult the datasheet for specific pin configurations and settings.
The typical power consumption of the DS26324GN+ varies depending on the operating frequency, supply voltage, and other factors. According to the datasheet, the typical power consumption is around 150mW at 100MHz with a 3.3V supply voltage. However, it's essential to consult the datasheet and perform thorough testing to determine the actual power consumption in your specific application.
DS26324GN+ datasheet
by Maxim Integrated Products
