DS9034PCI+ datasheet by Maxim Integrated Products

DS9034PCI+ Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the DS9034PCI+ can support?
  The DS9034PCI+ can support clock frequencies up to 66 MHz.
• How do I configure the DS9034PCI+ for 3.3V or 5V operation?
  The DS9034PCI+ can be configured for 3.3V or 5V operation by connecting the VCC pin to the desired voltage supply. Additionally, the VIO pin should be connected to the same voltage supply as the PCI bus.
• What is the purpose of the RST# pin on the DS9034PCI+?
  The RST# pin is an active-low reset input that resets the DS9034PCI+ when pulled low. It is typically connected to the PCI bus reset signal.
• How do I interface the DS9034PCI+ with a microcontroller or FPGA?
  The DS9034PCI+ can be interfaced with a microcontroller or FPGA using the PCI interface. The microcontroller or FPGA should be configured as a PCI target device, and the DS9034PCI+ should be configured as a PCI initiator.
• What is the power consumption of the DS9034PCI+?
  The power consumption of the DS9034PCI+ depends on the operating frequency and voltage supply. Typically, the power consumption is around 1.5W at 3.3V and 66 MHz.