The recommended layout and routing for the DS9034PCX+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the crystal oscillator. A 4-layer PCB with a dedicated ground plane is recommended.
The DS9034PCX+ requires a single 3.3V or 5V power supply. Ensure that the power supply is clean and well-regulated, and that the device is decoupled with a 0.1uF capacitor between VCC and GND. Additionally, ensure that the power supply can provide the required current.
The recommended crystal oscillator configuration for the DS9034PCX+ involves using a 12pF to 20pF load capacitor and a 10MHz to 40MHz crystal oscillator. The crystal oscillator should be connected between the XIN and XOUT pins, and the load capacitors should be connected between XIN and GND, and XOUT and GND.
The DS9034PCX+ can be configured for a specific clock frequency by selecting the appropriate crystal oscillator frequency and configuring the internal clock dividers. The device can be configured using the control registers, and the clock frequency can be verified using the clock output pins.
The DS9034PCX+ has a maximum junction temperature of 150°C. Ensure that the device is operated within the recommended temperature range, and that the PCB is designed to dissipate heat effectively. A thermal pad on the bottom of the package can be connected to a ground plane to improve heat dissipation.
DS9034PCX+ datasheet
by Maxim Integrated Products
Findchips
