Texas Instruments provides a recommended PCB layout in the datasheet, but it's also recommended to follow the guidelines in the 'High-Speed Layout Guidelines' application note (SLYT685) for optimal performance.
To ensure signal integrity, use controlled impedance traces, minimize trace lengths, and use termination resistors as recommended in the datasheet. Additionally, use a signal integrity analysis tool to simulate and optimize the design.
The maximum cable length supported by the DS90CR217MTD/NOPB depends on the specific application and the type of cable used. As a general guideline, the datasheet recommends a maximum cable length of 10 meters for FPD-Link III applications.
To troubleshoot issues with the DS90CR217MTD/NOPB, use a logic analyzer or oscilloscope to capture and analyze the signals. Check the power supply, clock signals, and data transmission for any errors or anomalies. Consult the datasheet and application notes for troubleshooting guidelines.
While the DS90CR217MTD/NOPB is optimized for FPD-Link III applications, it can be used in other high-speed data transmission applications with proper design and testing. However, Texas Instruments may not provide full support or guarantee compatibility in non-FPD-Link III applications.
DS90CR217MTD/NOPB datasheet
by Texas Instruments
Findchips
