The maximum cable length supported by the DS90LV019TMTC is 10 meters, but it can be extended up to 15 meters with proper termination and cable selection.
To ensure signal integrity, use a differential pair for clock and data signals, keep the clock frequency below 100 MHz, and use a shielded cable with a characteristic impedance of 100 ohms.
The power consumption of the DS90LV019TMTC is typically 150 mW (3.3 V, 45 mA) when operating at 100 MHz, but it can vary depending on the clock frequency and output load.
Yes, the DS90LV019TMTC is designed for high-speed data transmission up to 100 MHz, making it suitable for applications such as video transmission, high-speed data acquisition, and industrial control systems.
To configure the DS90LV019TMTC for LVDS or LVPECL output, use the SELVDD pin to select the output mode. For LVDS, tie SELVDD to VCC, and for LVPECL, tie SELVDD to GND.
DS90LV019TMTC datasheet
by Texas Instruments
Findchips
