The maximum cable length supported by the DS90LV110TMTC is approximately 10 meters at a data rate of 1.5 Gbps. However, this can vary depending on the cable quality, noise, and other environmental factors.
The DS90LV110TMTC can be configured for specific data rates using the SEL_RATE pin. The SEL_RATE pin is used to select between two data rate modes: 1.5 Gbps and 270 Mbps. The data rate can also be programmed using the I2C interface.
The power consumption of the DS90LV110TMTC varies depending on the data rate and operating mode. At 1.5 Gbps, the typical power consumption is around 250 mW. At 270 Mbps, the typical power consumption is around 150 mW.
The DS90LV110TMTC has a built-in clock recovery circuit, but it may require an external clock recovery circuit in certain applications. A clock recovery circuit can be implemented using a phase-locked loop (PLL) or a delay-locked loop (DLL) circuit.
The maximum operating temperature range of the DS90LV110TMTC is -40°C to 85°C. However, the device can be operated at temperatures above 85°C with reduced performance and reliability.
DS90LV110TMTC datasheet
by Texas Instruments
Findchips
