Texas Instruments provides a recommended PCB layout in the datasheet, but it's also recommended to follow the guidelines in the 'DS90UB913QSQE PCB Layout Guidelines' application note (SLUA623).
To ensure signal integrity, follow the guidelines in the 'DS90UB913QSQE Signal Integrity' application note (SLUA624). This includes using a solid ground plane, minimizing trace lengths, and using differential pairs for clock and data signals.
The maximum cable length supported by the DS90UB913QSQE/NOPB is 10 meters (33 feet) at a data rate of 3.3 Gbps. However, this can be extended to 15 meters (49 feet) at a data rate of 1.65 Gbps.
The DS90UB913QSQE/NOPB can be configured for different data rates using the SPI interface. The device supports data rates from 100 Mbps to 3.3 Gbps. Refer to the datasheet for specific register settings and configuration details.
The power consumption of the DS90UB913QSQE/NOPB varies depending on the data rate and operating mode. At 3.3 Gbps, the typical power consumption is 420 mW. Refer to the datasheet for detailed power consumption information.
DS90UB913QSQE/NOPB datasheet
by Texas Instruments
