The maximum cable length supported by the DS92LV1023TMSA/NOPB is 10 meters at 3.125 Gbps and 5 meters at 6.25 Gbps, assuming a good quality cable with minimal attenuation.
To ensure signal integrity, it is recommended to use a good quality cable, minimize the number of connectors, and use proper termination and shielding. Additionally, the PCB layout should be designed to minimize electromagnetic interference (EMI) and crosstalk.
The power consumption of the DS92LV1023TMSA/NOPB is typically around 350 mW at 3.3V supply voltage, but this can vary depending on the specific application and operating conditions.
Yes, the DS92LV1023TMSA/NOPB is compatible with other FPD-Link III devices from Texas Instruments, as well as with other devices that comply with the FPD-Link III specification.
To troubleshoot issues with the DS92LV1023TMSA/NOPB, it is recommended to check the power supply voltage, signal integrity, and cable quality. Additionally, using an oscilloscope or logic analyzer can help identify issues with the signal transmission.
DS92LV1023TMSA/NOPB datasheet
by Texas Instruments
