Texas Instruments provides a recommended PCB layout in the datasheet, but it's essential to follow good high-speed design practices, such as using a solid ground plane, minimizing trace lengths, and using 50-ohm transmission lines to ensure signal integrity.
The DS99R103TSQ/NOPB has a thermal pad that must be connected to a solid ground plane or a thermal relief pattern to dissipate heat. Ensure good thermal conductivity by using a thermal interface material and a heat sink if necessary.
The maximum cable length depends on the specific application and signal frequency. As a general guideline, the DS99R103TSQ/NOPB supports cable lengths up to 10 meters at 10 Gbps. However, it's recommended to consult the datasheet and perform signal integrity simulations to determine the optimal cable length for your specific use case.
The DS99R103TSQ/NOPB is a programmable device that can be configured for different data rates using the SPI interface. Consult the datasheet and the device's programming guide for specific configuration details and register settings.
The power consumption of the DS99R103TSQ/NOPB varies depending on the operating mode and data rate. Typically, it consumes around 350 mW at 10 Gbps. Consult the datasheet for detailed power consumption specifications and power-down modes.
DS99R103TSQ/NOPB datasheet
by Texas Instruments
