ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane to reduce thermal resistance.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended derating curves for the device. Additionally, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends using a thermistor or thermal sensor to monitor the temperature and adjust the operating conditions accordingly.
While the datasheet specifies a maximum voltage rating of 52V, it's essential to consider the voltage derating curve to ensure reliable operation. ROHM recommends limiting the voltage to 45V or less to ensure a safe operating margin.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input and output pins to protect the device from electrostatic discharge. Additionally, follow proper handling and storage procedures to prevent ESD damage during manufacturing and assembly.
ROHM recommends storing the EMT52T2R in a dry, cool place, away from direct sunlight and moisture. The storage temperature should be between -20°C and 30°C, and the humidity should be below 60%. Avoid storing the devices in close proximity to strong electromagnetic fields or radiation sources.
Findchips
Findchips