The recommended PCB footprint for ES2DA-13-F is a standard SOD-323 package with a 1.7mm x 1.3mm body size. A minimum pad size of 0.8mm x 0.8mm is recommended for reliable soldering.
To ensure reliable operation of ES2DA-13-F in high-temperature environments, it is recommended to derate the maximum junction temperature (Tj) by 1°C for every 1W of power dissipation above 25°C. Additionally, ensure good thermal design and heat dissipation on the PCB.
The maximum allowable voltage for ES2DA-13-F is 13V. Exceeding this voltage may cause permanent damage to the device.
Yes, ES2DA-13-F can be used in switching regulator applications. However, ensure that the device is properly biased and the switching frequency is within the recommended range to avoid oscillations and ensure stable operation.
ES2DA-13-F has built-in ESD protection, but it is still recommended to follow proper ESD handling procedures during assembly and handling to prevent damage. Use an ESD wrist strap or mat, and ensure that the device is stored in an ESD-safe environment.
ES2DA-13-F datasheet
by Diodes Incorporated
