Part Number
    Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    FM25V20A-DG datasheet by Cypress Semiconductor

    • Integrated Circuits (ICs) - Memory - IC FRAM 2M SPI 40MHZ 8TDFN
    • Original
    • Yes
    • Transferred
    • EAR99
    • 8542.32.00.71
    • 8542.32.00.70
    • The FM25V20A-DG is a 2-Mbit nonvolatile memory employing an advanced ferroelectric process. A ferroelectric random access memory or F-RAM is nonvolatile and performs reads and writes similar to a RAM. It provides reliable data retention for 121 years while eliminating the complexities, overhead, and system level reliability problems caused by serial flash, EEPROM, and other nonvolatile memories. Unlike serial flash and EEPROM, the FM25V20A-DG performs write operations at bus speed. No write delays are incurred. Data is written to the memory array immediately after each byte is successfully transferred to the device. The next bus cycle can commence without the need for data polling. In addition, the product offers substantial write endurance compared with other nonvolatile memories. The FM25V20A is capable of supporting 1014 read/write cycles, or 10 million times more write cycles than EEPROM. These capabilities make the FM25V20A ideal for nonvolatile memory applications requiring frequent or rapid writes. Examples range from data collection, where the number of write cycles may be critical, to demanding industrial controls where the long write time of serial flash or EEPROM can cause data loss. The FM25V20A provides substantial benefits to users of serial EEPROM or flash as a hardware drop-in replacement. The FM25V20A uses the high-speed SPI bus, which enhances the high-speed write capability of F-RAM technology. The device incorporates a read-only Device ID that allows the host to determine the manufacturer, product density, and product revision. The device specifications are guaranteed over an extended temperature range of -40 °C to +105 °C. The FM25V20A-DG is a 2-Mbit nonvolatile memory employing an advanced ferroelectric process. A ferroelectric random access memory or F-RAM is nonvolatile and performs reads and writes similar to a RAM.... Read more
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    FM25V20A-DG datasheet preview

    Datasheet Impression

    FM25V20A-DG Price & Stock

    Distributor Stock Lead Time Min Order Qty Price Buy
    Newark () 1,132 1
    • 1 $16.08
    • 10 $14.92
    • 100 $13.55
    • 1000 $13.21
    • 10000 $13.21
    Buy Now
    101 1
    • 1 $18.09
    • 10 $16.81
    • 100 $15.23
    • 1000 $14.88
    • 10000 $14.88
    Buy Now
    Quest Components 49
    • 1 $14.30
    • 10 $14.30
    • 100 $13.75
    • 1000 $13.75
    • 10000 $13.75
    Buy Now
    Flip Electronics () 20,235
    • 1 -
    • 10 -
    • 100 -
    • 1000 -
    • 10000 -
    Get Quote
    20,235
    • 1 -
    • 10 -
    • 100 -
    • 1000 -
    • 10000 -
    Get Quote
    Win Source Electronics () 10,000
    • 1 -
    • 10 $8.18
    • 100 $6.33
    • 1000 $6.33
    • 10000 $6.33
    Buy Now
    10,000
    • 1 -
    • 10 $10.44
    • 100 $8.48
    • 1000 $8.48
    • 10000 $8.48
    Buy Now

    FM25V20A-DG Frequently Asked Questions (FAQs)

    • The FM25V20A-DG has a minimum of 1 million write cycles, but this can vary depending on the operating conditions and usage patterns.
    • The FM25V20A-DG has built-in power-fail detection and write protection to prevent data corruption in the event of a power failure during a write operation.
    • The recommended storage temperature range for the FM25V20A-DG is -65°C to +150°C, but it can operate safely within the range of -40°C to +85°C.
    • Yes, the FM25V20A-DG can operate with a 5V power supply, but it is recommended to use a voltage regulator to ensure a stable 3.3V supply for optimal performance.
    • The FM25V20A-DG has a built-in secure erase function that can be initiated by sending a specific command sequence to the device. Refer to the datasheet for the exact command sequence and implementation details.
    Supplyframe Tracking Pixel