The maximum cable length supported by the FT2232HPQ-TRAY is approximately 3 meters (10 feet) for full-speed devices and 1.5 meters (5 feet) for low-speed devices, assuming a good quality cable with proper shielding and termination.
No, the FT2232HPQ-TRAY is not a USB hub. It is a USB-to-serial converter that can only connect to a single device. If you need to connect multiple devices, you will need a separate FT2232HPQ-TRAY for each device.
The FT2232HPQ-TRAY can be configured for 3.3V or 2.8V operation by connecting the VCCIO pin to the desired voltage level. Additionally, the VCCIO pin can be connected to an external voltage regulator to provide a specific voltage level.
The maximum data transfer rate of the FT2232HPQ-TRAY is 12 Mbps (million bits per second) for full-speed devices and 1.5 Mbps for low-speed devices.
Yes, the FT2232HPQ-TRAY can be used with a 5V power supply, but the VCCIO pin must be connected to a 3.3V or 2.8V voltage regulator to ensure proper operation.
FT2232HPQ-TRAY datasheet
by FTDI Chip
