10-bit bidirectional low voltage translator - Application: Voltage Translation ; Function: Open Drain Voltage Translation ; Number of bits: 10 ; Operating temperature: -40~85 Cel; Voltage Translation Range: 1.0 to 5.0 ~ 1.0 to 5.0 V; Package: SOT616-1 (HVQFN24); Container: Reel Pack, SMD, 13"
A good PCB layout for the GTL2010BS,118 involves keeping the input and output traces short and symmetrical, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure proper powering and decoupling, use a low-ESR capacitor (e.g., 100nF) close to the device's power pins, and a larger capacitor (e.g., 10uF) farther away. Also, use a 1-2 ohm resistor in series with the power supply to prevent voltage spikes.
The GTL2010BS,118 can operate up to 100 MHz, but the actual frequency limit depends on the specific application, PCB layout, and signal integrity. It's recommended to consult with NXP Semiconductors or a qualified engineer for specific guidance.
To ensure ESD protection, use a TVS (Transient Voltage Suppressor) diode or a dedicated ESD protection device, such as the NXP PESD5V0V1BL, in conjunction with the GTL2010BS,118. Follow proper PCB layout and handling procedures to prevent ESD damage.
The GTL2010BS,118 has a maximum junction temperature of 150°C. Ensure good thermal conductivity by using a heat sink or a thermal pad, and avoid overheating the device. Consult the datasheet for thermal resistance and power dissipation guidelines.
GTL2010BS,118 datasheet
by NXP Semiconductors
Findchips
