SL Power Electronics recommends a PCB layout with a large copper area connected to the tab of the HA15-0.9-A+G to dissipate heat efficiently. A minimum of 2 oz copper thickness is recommended, and the copper area should be at least 1 inch x 1 inch in size.
Yes, the HA15-0.9-A+G is designed to withstand high-vibration environments. However, it's essential to ensure that the PCB is properly secured and the component is mounted using a suitable method, such as screw mounting or adhesive, to prevent damage or dislodging.
SL Power Electronics recommends an output filter capacitor with a maximum capacitance of 10uF to ensure stable operation and prevent oscillations. Exceeding this value may lead to instability or reduced performance.
Yes, the HA15-0.9-A+G can be used in a redundant or parallel configuration to achieve higher power ratings or improve system reliability. However, it's crucial to ensure that the units are properly synchronized and configured to prevent damage or instability.
SL Power Electronics recommends an input fuse rating of 1A to 2A, depending on the specific application and input voltage. A slower-blow fuse is recommended to prevent nuisance tripping due to inrush currents.
