-
The recommended operating voltage range for HCF4527BEY is 4.5V to 15.5V, although it can operate from 3V to 18V with reduced performance.
-
To ensure proper power-up and initialization, apply a power-on reset (POR) signal to the VCC pin, and then apply a clock signal to the CLKIN pin. The device will then initialize and start operating.
-
The maximum clock frequency supported by the HCF4527BEY is 100 MHz, although it can operate at frequencies up to 150 MHz with reduced performance and increased power consumption.
-
The OE pin is active-low, meaning it should be pulled low to enable the output. When OE is high, the output is in a high-impedance state. Ensure proper OE signal routing and termination to avoid signal integrity issues.
-
The typical power consumption of the HCF4527BEY is around 20-30 mA, depending on the operating frequency, voltage, and output loading. However, this can vary depending on the specific application and design.