The recommended operating voltage range for the HEF4029BT is 5V to 15V, with a typical voltage of 10V.
To ensure proper power sequencing, the VCC pin should be powered up before the input signals, and the input signals should be stable before the clock signal is applied.
The maximum clock frequency that the HEF4029BT can handle is 10 MHz, but this can vary depending on the specific application and operating conditions.
The asynchronous reset input (R) should be connected to VCC through a pull-up resistor, and a low-going pulse should be applied to reset the device.
The enable input (E) is used to enable or disable the output of the device. When E is high, the output is enabled, and when E is low, the output is disabled.
