The maximum frequency of operation for the HEF4050BP is typically around 10 MHz, but it can vary depending on the specific application and operating conditions.
To ensure proper power supply, connect the VCC pin to a stable 5V power source, and the VSS pin to ground. Also, make sure to decouple the power supply with a 0.1uF capacitor to reduce noise and ensure stable operation.
The maximum input voltage that the HEF4050BP can handle is 5.5V. Exceeding this voltage may damage the device.
When the HEF4050BP is not in use, it is recommended to tie the output pins to a fixed logic level (either VCC or VSS) to prevent floating outputs and reduce power consumption.
The HEF4050BP is a relatively slow device with a propagation delay of around 10-20 ns. It is not suitable for high-speed applications and is better suited for low-to-medium frequency applications.
