The recommended operating voltage range for HEF4082BP,652 is 4.5V to 15.5V, with a typical voltage of 10V.
To ensure proper thermal management, it's recommended to provide a heat sink or a thermal pad on the package, and to keep the ambient temperature below 70°C. Additionally, ensure good airflow and avoid blocking the airflow around the device.
The maximum frequency of operation for HEF4082BP,652 is 10 MHz, but it can be operated at higher frequencies with reduced voltage and current.
The input impedance of HEF4082BP,652 is typically high (around 1 kΩ), and the output impedance is low (around 100 Ω). Ensure that the input signals are properly terminated, and the output is loaded with a suitable impedance to avoid signal reflections and distortion.
To minimize noise and signal degradation, it's recommended to keep the input and output traces short and separate, use a solid ground plane, and avoid running signals under the device. Additionally, use a decoupling capacitor (e.g., 100 nF) close to the device to filter out noise and ripple.
HEF4082BP,652 datasheet
by NXP Semiconductors
