The recommended operating voltage range for the HEF4518BP is 4.5V to 15.5V, although it can operate down to 3V with reduced performance.
To ensure proper power-on and power-off, make sure to follow the recommended power-up and power-down sequences, and provide a stable voltage supply with minimal noise and ripple.
The maximum clock frequency that the HEF4518BP can handle is 10MHz, although this may vary depending on the specific application and operating conditions.
The asynchronous reset input (MR) should be tied to VCC through a pull-up resistor, and should be driven low to reset the device. The reset input should be synchronized with the clock signal to ensure proper operation.
The propagation delay time for the HEF4518BP is typically around 20-30ns, although this may vary depending on the specific application and operating conditions.
