The recommended operating temperature range for the HLMP-HL63-TX0DD is -40°C to 85°C.
The HLMP-HL63-TX0DD is a polarized component, and it's essential to observe the correct polarity when mounting and connecting it. The cathode (negative leg) is marked with a flat edge or a notch, and it should be connected to the negative voltage supply or ground.
The maximum forward current rating for the HLMP-HL63-TX0DD is 30mA. Exceeding this rating may reduce the LED's lifespan or cause it to fail prematurely.
To calculate the required resistor value, you need to know the supply voltage, the desired current, and the forward voltage drop of the LED. You can use Ohm's law and the LED's characteristics to calculate the resistor value. For example, if you want to operate the LED at 20mA with a 5V supply, and the forward voltage drop is 2.1V, the required resistor value would be approximately 150Ω.
The HLMP-HL63-TX0DD is a commercial-grade LED indicator, and while it's a reliable component, it may not meet the stringent requirements of high-reliability applications such as aerospace, defense, or medical devices. For such applications, it's recommended to use LEDs with higher reliability ratings, such as those with a higher mean time between failures (MTBF) or a higher failure rate grade.
Findchips
Findchips