The recommended power-on sequence is to apply VCC first, followed by VDD. This ensures that the internal voltage regulators are properly initialized.
To ensure accurate temperature measurement, make sure to use a thermistor with a high accuracy rating (e.g., ±0.1°C) and follow the recommended thermistor connection and calibration procedures outlined in the datasheet.
The maximum allowable voltage on the VDD pin is 5.5V. Exceeding this voltage may damage the internal voltage regulators or other components.
Yes, the ICM7213IPD can operate with a 3.3V supply voltage, but the output voltage range of the DACs will be reduced accordingly. Consult the datasheet for specific output voltage ranges at different supply voltages.
To troubleshoot issues with the serial interface, check the clock frequency, data format, and pin connections. Ensure that the serial clock frequency is within the recommended range (100 kHz to 400 kHz) and that the data is transmitted in the correct format (MSB first).
