The maximum operating frequency of the ICM7556MJD/HR is typically 1 MHz, but it can be as high as 2 MHz with proper component selection and layout.
To ensure stable operation in noisy environments, use a decoupling capacitor (e.g., 0.1 μF) between VCC and GND, and consider adding a noise filter (e.g., RC filter) to the trigger input.
The minimum supply voltage for the ICM7556MJD/HR is 2 V, and the maximum supply voltage is 18 V.
Yes, the ICM7556MJD/HR can be used as a crystal oscillator, but it requires an external crystal and capacitors. The crystal frequency should be between 30 kHz and 100 kHz.
The timing period of the ICM7556MJD/HR can be calculated using the formula: T = 1.38 * R * C, where R is the resistance in ohms and C is the capacitance in farads.
ICM7556MJD/HR datasheet
by Maxim Integrated Products
