NXP recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure accurate temperature measurement, it's essential to calibrate the sensor, use a high-precision voltage reference, and minimize noise and interference in the measurement circuit.
The maximum allowed voltage on the output pin is VCC + 0.5V, but it's recommended to keep it below VCC to prevent damage to the internal circuitry.
Yes, KTY82/210 is designed to withstand high vibrations, but it's essential to ensure proper mounting and soldering to prevent mechanical stress on the package.
Use a low-pass filter or a buffer amplifier to minimize noise and interference in the output signal. Also, keep the output signal trace as short as possible and away from high-frequency signals.
Findchips
Findchips