LM22672MRE-ADJ/NOPB datasheet by Texas Instruments

LM22672MRE-ADJ/NOPB Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the LM22672MRE-ADJ/NOPB?
  The maximum input voltage that can be applied to the LM22672MRE-ADJ/NOPB is 42V, but it's recommended to keep it below 40V for reliable operation.
• How do I adjust the output voltage of the LM22672MRE-ADJ/NOPB?
  The output voltage of the LM22672MRE-ADJ/NOPB can be adjusted by connecting a resistor divider network between the output and the ADJ pin. The ratio of the resistors determines the output voltage.
• What is the minimum input capacitance required for the LM22672MRE-ADJ/NOPB?
  The minimum input capacitance required for the LM22672MRE-ADJ/NOPB is 10uF, but it's recommended to use a higher value (e.g. 22uF) for better performance and stability.
• Can I use the LM22672MRE-ADJ/NOPB in a high-temperature environment?
  The LM22672MRE-ADJ/NOPB is rated for operation up to 125°C, but the maximum junction temperature should not exceed 150°C. It's recommended to use thermal management techniques to keep the device temperature within the specified range.
• How do I ensure the stability of the LM22672MRE-ADJ/NOPB in my design?
  To ensure stability, it's recommended to follow the layout guidelines in the datasheet, use a low-ESR output capacitor, and add a small ceramic capacitor (e.g. 10nF) between the output and ground.