The maximum input voltage that can be applied to the LM2672M-ADJ is 40V. Exceeding this voltage can cause damage to the device.
The output voltage of the LM2672M-ADJ can be adjusted by connecting a resistor divider network between the output and the adjust pin. The ratio of the resistors determines the output voltage.
The minimum input voltage required for the LM2672M-ADJ to operate is 7.5V. The device will not regulate the output voltage if the input voltage is below this threshold.
The LM2672M-ADJ is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It's recommended to derate the device's output current and voltage at high temperatures.
To protect the LM2672M-ADJ from input voltage transients, a transient voltage suppressor (TVS) diode can be connected between the input and ground. This will help to clamp the input voltage and prevent damage to the device.