LM2750LD-ADJ/NOPB datasheet by Texas Instruments

LM2750LD-ADJ/NOPB Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the LM2750LD-ADJ/NOPB?
  The maximum input voltage that can be applied to the LM2750LD-ADJ/NOPB is 15V. Exceeding this voltage may damage the device.
• How do I ensure stability in the output voltage of the LM2750LD-ADJ/NOPB?
  To ensure stability in the output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the input capacitor should be at least 1uF with an ESR of less than 1 ohm.
• What is the minimum input voltage required for the LM2750LD-ADJ/NOPB to operate?
  The minimum input voltage required for the LM2750LD-ADJ/NOPB to operate is 3.5V. However, the device can operate down to 2.5V with reduced performance.
• Can the LM2750LD-ADJ/NOPB be used in high-temperature applications?
  Yes, the LM2750LD-ADJ/NOPB can be used in high-temperature applications up to 125°C. However, the device's performance may degrade at higher temperatures, and the output voltage may drop.
• How do I adjust the output voltage of the LM2750LD-ADJ/NOPB?
  The output voltage of the LM2750LD-ADJ/NOPB can be adjusted by connecting a resistor divider network between the output and the adjust pin. The ratio of the resistors determines the output voltage.