The maximum input voltage that can be applied to the LM2832XSD/NOPB is 42V, but it's recommended to operate within the specified input voltage range of 6.5V to 40V for optimal performance and reliability.
To ensure the stability of the output voltage, it's essential to use the recommended output capacitor value and type, and to follow the layout guidelines provided in the datasheet. Additionally, the input capacitor should be placed close to the VIN pin to minimize noise and ensure stability.
The maximum output current that the LM2832XSD/NOPB can deliver is 3A, but it's recommended to operate within the specified output current range of 0.5A to 2.5A for optimal performance and reliability.
The output voltage of the LM2832XSD/NOPB can be adjusted by using a resistor divider network between the VOUT pin and the GND pin. The output voltage can be calculated using the formula: VOUT = 0.8V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
The EN (Enable) pin on the LM2832XSD/NOPB is used to enable or disable the regulator. When the EN pin is pulled high, the regulator is enabled, and when it's pulled low, the regulator is disabled. This pin can be used to implement power sequencing or to turn off the regulator when not in use.
LM2832XSD/NOPB datasheet
by Texas Instruments
