The maximum input voltage that can be applied to the LM2833XSD/NOPB is 15V, but it's recommended to operate within the recommended input voltage range of 4.5V to 12V for optimal performance and reliability.
To ensure the stability of the output voltage, it's essential to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Additionally, the output capacitor should be placed as close to the output pin as possible to minimize noise and oscillations.
The maximum output current that the LM2833XSD/NOPB can deliver is 500mA. However, the output current should be derated based on the input voltage, ambient temperature, and other operating conditions to ensure reliable operation.
To reduce the noise and ripple in the output voltage, it's recommended to use a low-ESR output capacitor, and to add a noise-reducing capacitor (e.g., 10nF) between the output pin and ground. Additionally, the input voltage should be well-regulated and filtered to minimize noise and ripple.
The thermal shutdown temperature of the LM2833XSD/NOPB is typically around 150°C. When the junction temperature exceeds this threshold, the device will shut down to prevent damage.
LM2833XSD/NOPB datasheet
by Texas Instruments
