LM3410YMY/NOPB datasheet by Texas Instruments

LM3410YMY/NOPB Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the LM3410YMY/NOPB can handle?
  The maximum input voltage is 42V, but it's recommended to keep it below 40V for reliable operation.
• How do I ensure the stability of the output voltage?
  To ensure stability, use a minimum output capacitance of 10uF, and ensure the output capacitor's ESR is less than 1 ohm. Also, use a minimum input capacitance of 1uF.
• What is the maximum output current that the LM3410YMY/NOPB can provide?
  The maximum output current is 1.5A, but it's recommended to keep it below 1.2A for reliable operation and to prevent overheating.
• How do I adjust the output voltage?
  The output voltage can be adjusted by using a resistor divider network between the output and the ADJ pin. The output voltage is determined by the ratio of the resistors and the internal reference voltage.
• What is the purpose of the EN pin?
  The EN (enable) pin is used to turn the regulator on or off. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled.