LM380N/NOPB datasheet by Texas Instruments

LM380N/NOPB Frequently Asked Questions (FAQs)

• What is the maximum power supply voltage that can be used with the LM380N?
  The maximum power supply voltage for the LM380N is 22V. Exceeding this voltage may cause damage to the device.
• How do I ensure stability and prevent oscillations in the LM380N?
  To ensure stability, use a bypass capacitor (typically 10uF to 100uF) between the power supply pins (VCC and GND) and keep the input and output impedance low. Also, use a decoupling capacitor (typically 0.1uF to 1uF) between the power supply pins and the amplifier input.
• What is the minimum load impedance required for the LM380N?
  The minimum load impedance for the LM380N is 2kΩ. Using a load impedance lower than this may cause distortion and instability.
• Can I use the LM380N as a stereo amplifier?
  Yes, you can use two LM380N devices to create a stereo amplifier. Each device can be used to amplify one channel of the stereo signal.
• How do I reduce noise and hum in the LM380N circuit?
  To reduce noise and hum, use a well-regulated power supply, keep the circuit layout clean and compact, and use shielding and grounding techniques to minimize electromagnetic interference (EMI).