The maximum operating temperature range for the LM3S617-IQN50-C2 is -40°C to 85°C.
The clock source for the LM3S617-IQN50-C2 can be configured using the PLL (Phase-Locked Loop) or the internal RC oscillator. The PLL can be configured to use an external crystal or an external clock source. The internal RC oscillator can be used as a clock source, but it is not as accurate as the PLL.
The maximum current consumption of the LM3S617-IQN50-C2 is approximately 350mA at 3.3V and 50MHz.
The LM3S617-IQN50-C2 can be programmed using the IAR Embedded Workbench, Keil µVision, or the Texas Instruments Code Composer Studio (CCS) development environment. The device can be programmed using the JTAG or SWD interface.
The maximum frequency of the LM3S617-IQN50-C2 is 50MHz.
LM3S617-IQN50-C2 datasheet
by Texas Instruments
Findchips
