The LM5017MRX/NOPB can handle a maximum input voltage of 60V, but it's recommended to operate it within the specified input voltage range of 12V to 42V for optimal performance.
To ensure the stability of the output voltage, it's essential to use the recommended output capacitor values and types, and to follow the layout guidelines provided in the datasheet. Additionally, the input capacitor should be placed close to the VIN pin to minimize noise and ensure stability.
The LM5017MRX/NOPB can provide a maximum output current of 1.5A, but it's recommended to operate it within the specified output current range of 0.5A to 1.2A for optimal performance and reliability.
The output voltage of the LM5017MRX/NOPB can be adjusted by using a resistor divider network between the VOUT pin and the GND pin. The output voltage can be calculated using the formula: VOUT = 0.8V x (R1 + R2) / R2, where R1 and R2 are the resistors in the divider network.
The EN (Enable) pin on the LM5017MRX/NOPB is used to enable or disable the regulator. When the EN pin is pulled high (above 1.4V), the regulator is enabled, and when it's pulled low (below 0.4V), the regulator is disabled.
LM5017MRX/NOPB datasheet
by Texas Instruments
