Part Number
    Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img LMH6723MAX/NOPB datasheet by Texas Instruments

    • LMH6723 - Single/Quad 370 MHz 1 mA Current Feedback Op Amp 8-SOIC -40 to 85
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.33.00.01
    • 8542.33.00.00

    LMH6723MAX/NOPB datasheet preview
    PCB Symbol, Footprint & 3D Model
    Download Datasheet

    LMH6723MAX/NOPB Price & Stock

    Distributor Stock Lead Time Min Order Qty Price Buy
    DigiKey 2,500
    • 1 -
    • 10 -
    • 100 -
    • 1000 -
    • 10000 $1.32
    Buy Now
    Mouser Electronics ()
    • 1 $3.06
    • 10 $2.30
    • 100 $1.81
    • 1000 $1.71
    • 10000 $1.62
    Get Quote
    • 1 -
    • 10 -
    • 100 -
    • 1000 -
    • 10000 $1.33
    Get Quote
    Verical () 26,797 150
    • 1 -
    • 10 -
    • 100 -
    • 1000 $1.79
    • 10000 $1.68
    Buy Now
    2,500 150
    • 1 -
    • 10 -
    • 100 -
    • 1000 $1.79
    • 10000 $1.68
    Buy Now
    Rochester Electronics 29,301 1
    • 1 -
    • 10 -
    • 100 $1.60
    • 1000 $1.43
    • 10000 $1.34
    Buy Now
    TME 2,500 2,500
    • 1 -
    • 10 -
    • 100 -
    • 1000 -
    • 10000 $1.83
    Buy Now

    LMH6723MAX/NOPB Frequently Asked Questions (FAQs)

    • Texas Instruments provides a recommended PCB layout in the datasheet, but it's also recommended to follow general high-frequency PCB design guidelines, such as using a solid ground plane, minimizing trace lengths, and using 50-ohm transmission lines for input and output signals.
    • The feedback resistors (Rf and Rg) determine the gain of the amplifier. The recommended values are provided in the datasheet, but the optimal values may vary depending on the specific application. A good starting point is to use the recommended values and then adjust them based on the desired gain and bandwidth requirements.
    • The maximum power dissipation of the LMH6723MAX is dependent on the ambient temperature and the thermal resistance of the package. The datasheet provides a thermal resistance value (θJA) of 34°C/W. To ensure the device doesn't overheat, it's recommended to provide adequate heat sinking, such as a copper plane or a heat sink, and to keep the ambient temperature below 85°C.
    • Yes, the LMH6723MAX can be used as a single-ended amplifier. To configure it as a single-ended amplifier, connect the non-inverting input (VIN+) to the signal source, and tie the inverting input (VIN-) to ground through a resistor. The output will be single-ended, and the gain will be determined by the feedback resistors (Rf and Rg).
    • The recommended input termination is a 50-ohm resistor to ground, and the recommended output termination is a 50-ohm resistor to the load. This ensures maximum power transfer and minimizes reflections.
    Supplyframe Tracking Pixel Supplyframe Tracking Pixel