Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img LMV551MG/NOPB datasheet by Texas Instruments

    • LMV551 - 3 MHz, Micropower RRO Amplifier 5-SC70 -40 to 125
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.33.00.01
    • 8542.33.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    LMV551MG/NOPB datasheet preview

    LMV551MG/NOPB Frequently Asked Questions (FAQs)

    • The maximum power dissipation of the LMV551MG/NOPB is 670mW, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (θJA) of 125°C/W.
    • Yes, the LMV551MG/NOPB is rated for operation from -40°C to 125°C, making it suitable for high-temperature applications. However, the device's performance may degrade at higher temperatures, and the maximum junction temperature (TJ) should not exceed 150°C.
    • To ensure stability, it's essential to follow proper compensation techniques, such as adding a capacitor in the feedback loop or using a resistor in series with the feedback capacitor. Additionally, the datasheet provides guidance on stability analysis and compensation techniques.
    • To minimize noise and ensure optimal performance, it's recommended to use a star-grounding technique, where the grounds of the power supplies, analog circuits, and digital circuits are connected at a single point. Additionally, keep the layout compact, and use short traces and low-impedance paths to minimize noise and radiation.
    • While the LMV551MG/NOPB can be used as a comparator, it's not the most suitable device for this application. The device's output stage is designed for linear operation, and its output voltage swing may not be rail-to-rail. For comparator applications, a dedicated comparator IC is recommended.
    Supplyframe Tracking Pixel