Part Number
Part Number
    Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img LP2904DR datasheet by Texas Instruments

    • ULTRA-LOW-POWER DUAL OPERATIONAL AMPLIFIERS
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.33.00.01
    • 8542.33.00.00

    LP2904DR datasheet preview

    LP2904DR Price & Stock

    Distributor Stock Lead Time Min Order Qty Price Buy
    DigiKey () 2,500
    • 1 -
    • 10 -
    • 100 -
    • 1000 -
    • 10000 $0.43
    Buy Now
    1
    • 1 $1.25
    • 10 $1.25
    • 100 $1.25
    • 1000 $1.25
    • 10000 $1.25
    Buy Now
    • 1 -
    • 10 -
    • 100 -
    • 1000 -
    • 10000 -
    Buy Now
    Mouser Electronics 719
    • 1 $1.25
    • 10 $1.09
    • 100 $1.09
    • 1000 $0.44
    • 10000 $0.42
    Buy Now
    Rochester Electronics 261 1
    • 1 -
    • 10 -
    • 100 $0.53
    • 1000 $0.44
    • 10000 $0.39
    Buy Now
    Vyrian () 4,453
    • 1 -
    • 10 -
    • 100 -
    • 1000 -
    • 10000 -
    Get Quote
    1,247
    • 1 -
    • 10 -
    • 100 -
    • 1000 -
    • 10000 -
    Get Quote

    LP2904DR Frequently Asked Questions (FAQs)

    • The LP2904DR can handle input voltages up to 30V, but it's recommended to keep it below 24V for optimal performance and to prevent overheating.
    • To ensure stability, make sure to follow the recommended layout and component placement guidelines, use a sufficient output capacitor, and add a 10nF-100nF capacitor between the VIN and GND pins to filter out noise.
    • The LP2904DR can operate with input voltages as low as 7V, but the output voltage regulation may not be as accurate below 10V.
    • The LP2904DR is rated for operation up to 125°C, but its performance may degrade above 85°C. Make sure to provide adequate heat sinking and consider derating the output current at high temperatures.
    • The output voltage of the LP2904DR is determined by the resistor divider network between the VOUT and ADJ pins. Use the formula: VOUT = 1.23V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
    Supplyframe Tracking Pixel