The maximum input voltage that can be applied to the LP2951ACMX-3.3/NOPB is 20V. Exceeding this voltage may damage the device.
To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF and an ESR of less than 1 ohm. Additionally, the input capacitor should be at least 1uF with an ESR of less than 1 ohm.
The minimum input voltage required for the LP2951ACMX-3.3/NOPB to operate is 3.5V. However, the device can operate down to 2.7V with reduced performance.
The LP2951ACMX-3.3/NOPB is rated for operation up to 125°C. However, the device's performance may degrade at high temperatures, and the output voltage may drop. It is recommended to derate the output current at high temperatures.
The output voltage tolerance of the LP2951ACMX-3.3/NOPB is ±2%. This means that the output voltage can vary by up to 2% of the nominal output voltage (3.3V) due to manufacturing tolerances and operating conditions.
LP2951ACMX-3.3/NOPB datasheet
by Texas Instruments
