LP2980IM5-ADJ datasheet by Texas Instruments

LP2980IM5-ADJ Frequently Asked Questions (FAQs)

• What is the minimum input voltage required for the LP2980IM5-ADJ to operate?
  The minimum input voltage required is 2.5V, but it's recommended to have at least 2.7V to ensure proper operation.
• How do I adjust the output voltage of the LP2980IM5-ADJ?
  The output voltage can be adjusted by connecting a resistor divider network between the output and the ADJ pin. The output voltage is determined by the ratio of the resistors.
• What is the maximum output current of the LP2980IM5-ADJ?
  The maximum output current of the LP2980IM5-ADJ is 50mA. Exceeding this current may cause the regulator to overheat or malfunction.
• Does the LP2980IM5-ADJ have built-in short-circuit protection?
  Yes, the LP2980IM5-ADJ has built-in short-circuit protection, which limits the output current to prevent damage in case of a short circuit.
• What is the typical dropout voltage of the LP2980IM5-ADJ?
  The typical dropout voltage of the LP2980IM5-ADJ is 0.3V, which means the input voltage can be as low as 0.3V above the output voltage and still maintain regulation.