The maximum input voltage that can be applied to the LP2992AILD-1.8/NOPB is 12V, but it's recommended to keep it below 10V for optimal performance and to prevent overheating.
To ensure stability, make sure to follow the recommended layout and component placement guidelines, use a sufficient output capacitor (at least 10uF), and keep the input and output capacitors close to the device.
The minimum input voltage required for the LP2992AILD-1.8/NOPB to operate is 2.7V, but it's recommended to keep it above 3V for optimal performance.
The LP2992AILD-1.8/NOPB is rated for operation up to 125°C, but it's recommended to derate the output current and input voltage at higher temperatures to prevent overheating and ensure reliability.
The output voltage tolerance of the LP2992AILD-1.8/NOPB is ±2% over the entire operating temperature range. You can calculate the output voltage tolerance by multiplying the nominal output voltage (1.8V) by the tolerance percentage (2%).
LP2992AILD-1.8/NOPB datasheet
by Texas Instruments
