LP38853MR-ADJ/NOPB datasheet by Texas Instruments

LP38853MR-ADJ/NOPB Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the LP38853MR-ADJ/NOPB?
  The maximum input voltage that can be applied to the LP38853MR-ADJ/NOPB is 15V. Exceeding this voltage may damage the device.
• How do I adjust the output voltage of the LP38853MR-ADJ/NOPB?
  The output voltage of the LP38853MR-ADJ/NOPB can be adjusted by connecting a resistor divider network between the output and the adjust pin. The ratio of the resistors determines the output voltage.
• What is the minimum input voltage required for the LP38853MR-ADJ/NOPB to operate?
  The minimum input voltage required for the LP38853MR-ADJ/NOPB to operate is 2.5V. The device may not function properly if the input voltage is lower than this.
• Can I use the LP38853MR-ADJ/NOPB in a high-temperature environment?
  The LP38853MR-ADJ/NOPB is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It's recommended to derate the device's output current and voltage at high temperatures.
• How do I ensure the stability of the LP38853MR-ADJ/NOPB output voltage?
  To ensure the stability of the LP38853MR-ADJ/NOPB output voltage, it's recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the input capacitor should be at least 1uF.