The maximum operating temperature range for the LPC1830FBD144 is -40°C to +105°C, as specified in the datasheet. However, it's recommended to operate within -20°C to +85°C for optimal performance and reliability.
The clock settings for the LPC1830FBD144 can be configured using the Clock Control Unit (CCU) registers. The CCU provides a flexible clock generation and distribution system, allowing you to configure the clock frequency, clock source, and clock distribution to various peripherals. Refer to the LPC1830 user manual for detailed information on clock configuration.
The maximum current consumption of the LPC1830FBD144 depends on the operating frequency, voltage, and peripheral usage. According to the datasheet, the typical current consumption is around 130 mA at 100 MHz, 3.3 V, and 25°C. However, this value can vary depending on the specific application and usage scenario.
The LPC1830FBD144 provides several low-power modes, including Sleep, Deep Sleep, and Power-Down modes. These modes can be entered using the Power Management Controller (PMC) registers. You can also use the ARM Cortex-M3 processor's built-in sleep modes, such as WFI (Wait For Interrupt) and WFE (Wait For Event), to reduce power consumption. Refer to the LPC1830 user manual for detailed information on low-power modes and power management.
The LPC1830FBD144's USB interface supports Full-Speed USB (USB 2.0) with a maximum data transfer rate of 12 Mbps. The USB interface is also compliant with the USB 2.0 specification, ensuring compatibility with a wide range of USB devices and hosts.
LPC1830FBD144 datasheet
by NXP Semiconductors
