LT3493IDCB#PBF Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the LT3493?
  The maximum input voltage that can be applied to the LT3493 is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
• How do I ensure the stability of the output voltage in the LT3493?
  To ensure the stability of the output voltage, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, keep the output voltage within the recommended range of 0.8V to 5.5V.
• What is the maximum output current that the LT3493 can deliver?
  The maximum output current that the LT3493 can deliver is 3A, but it's recommended to keep it below 2.5A for optimal performance and reliability.
• How do I configure the LT3493 for a specific output voltage?
  To configure the LT3493 for a specific output voltage, use the feedback resistors R1 and R2 to set the output voltage. The output voltage can be calculated using the formula: Vout = 0.8V * (1 + R2/R1).
• What is the purpose of the EN pin on the LT3493?
  The EN (enable) pin on the LT3493 is used to turn the device on or off. When the EN pin is high, the device is enabled, and when it's low, the device is disabled.