M25P64-VME6G datasheet by STMicroelectronics

M25P64-VME6G Frequently Asked Questions (FAQs)

• What is the maximum number of erase cycles for the M25P64-VME6G?
  The M25P64-VME6G has a minimum of 100,000 erase cycles, but the actual number of cycles may vary depending on the usage and operating conditions.
• How do I handle the hold signal (HOLD#) during read and write operations?
  The HOLD# signal should be kept low during read and write operations to ensure that the device is not interrupted. If the HOLD# signal is asserted high, the device will enter a 'hold' state, and all operations will be paused.
• What is the recommended power-up sequence for the M25P64-VME6G?
  The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal. This ensures that the device is properly initialized and ready for operation.
• How do I handle the WP# (Write Protect) signal?
  The WP# signal should be tied low to enable write operations. If WP# is tied high, the device will be in a write-protected state, and no write operations will be allowed.
• What is the maximum clock frequency for the M25P64-VME6G?
  The maximum clock frequency for the M25P64-VME6G is 50 MHz, but it can be operated at lower frequencies depending on the application requirements.