M29F016D70N1 datasheet by STMicroelectronics

M29F016D70N1 Frequently Asked Questions (FAQs)

• What is the maximum operating frequency of the M29F016D70N1?
  The maximum operating frequency of the M29F016D70N1 is 33 MHz.
• How do I handle the hold signal (HOLD#) during read and write operations?
  The HOLD# signal should be asserted low to pause the current operation and de-asserted high to resume the operation. During hold, the device will tri-state its outputs and ignore any input signals.
• What is the purpose of the Write Enable Latch (WEL) signal?
  The WEL signal is used to enable or disable write operations to the device. When WEL is high, write operations are enabled, and when WEL is low, write operations are disabled.
• How do I determine the device density and organization?
  The M29F016D70N1 has a density of 16 Mbits and is organized as 1024 sectors of 16 Kbytes each.
• What is the recommended power-up and power-down sequence for the device?
  The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal. The recommended power-down sequence is to remove the clock signal, then VPP (if used), and finally VCC.