The recommended power-up sequence is to apply VCC first, followed by VEE. This ensures that the internal biasing circuitry is properly established before the output stages are enabled.
To ensure stability, add a 10nF to 100nF capacitor in parallel with a 1kΩ to 10kΩ resistor between the output and ground. This helps to dampen the output and prevent oscillations.
The MAX038CWP can drive up to 100pF of capacitive load. Exceeding this limit may cause instability or oscillations.
To reduce power consumption, consider using a lower supply voltage (VCC) or reducing the output current. You can also use the shutdown pin (SHDN) to disable the device when not in use.
The MAX038CWP can operate up to 2.5MHz. However, the actual operating frequency may be limited by the specific application and load conditions.
MAX038CWP datasheet
by Maxim Integrated Products
