The MAX1113CEE+ requires careful layout and placement to ensure proper operation. It is recommended to follow the layout guidelines provided in the datasheet, including keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources.
The digital output of the MAX1113CEE+ is CMOS-compatible and can be connected directly to a microcontroller or other digital logic. However, it is recommended to use a buffer or a voltage translator if the output needs to drive a long cable or a high-capacitance load.
The maximum sampling rate of the MAX1113CEE+ is 1Msps (million samples per second). However, the actual sampling rate may be limited by the system clock frequency, the conversion time, and the settling time of the analog input signal.
The MAX1113CEE+ does not require calibration. It has an internal calibration circuit that ensures accurate conversions. However, it is recommended to perform a system-level calibration to account for any system-specific errors or offsets.
The MAX1113CEE+ has a power-on reset (POR) circuit that ensures the device is in a known state after power-up. The POR circuit holds the device in a reset state until the power supply voltage reaches a minimum threshold, and then releases the reset after a short delay.
MAX1113CEE+ datasheet
by Maxim Integrated Products
