Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img MAX1290BCEI+ datasheet by Maxim Integrated Products

    • 400ksps, +5V, 8-/4-Channel, 12-Bit ADCs with +2.5V Reference and Parallel Interface
    • Original
    • Yes
    • Yes
    • Transferred
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    MAX1290BCEI+ datasheet preview

    MAX1290BCEI+ Frequently Asked Questions (FAQs)

    • The recommended layout and routing for the MAX1290BCEI+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
    • To optimize the performance of the MAX1290BCEI+ in a noisy environment, it's recommended to use a low-pass filter on the input signals, use a shielded enclosure, and keep the device away from high-frequency sources. Additionally, using a common-mode choke on the input signals can help to reduce noise.
    • The maximum operating temperature range for the MAX1290BCEI+ is -40°C to +125°C. However, it's recommended to operate the device within the -20°C to +85°C range for optimal performance and reliability.
    • To troubleshoot issues with the MAX1290BCEI+, start by checking the power supply voltage, ensuring that it's within the recommended range. Then, check the input signals for noise and distortion, and verify that the device is properly configured. If the issue persists, use an oscilloscope to analyze the output signals and check for any signs of oscillation or instability.
    • Yes, the MAX1290BCEI+ can be used in a battery-powered device. However, it's recommended to use a low-dropout linear regulator (LDO) to regulate the power supply voltage, and to ensure that the device is properly powered down when not in use to minimize power consumption.
    Supplyframe Tracking Pixel